R&I in Support of the Clean Industrial Deal: Decarbonisation of energy intensive industries (IA) (Processes4Planet and Clean Steel partnerships) (HORIZON-CID-2027-01-01)

Scope: The Clean Industrial Deal aims to secure the EU as an attractive location for manufacturing, including for energy-intensive industries, and to promote clean tech and new circular business models in order to meet Europe’s ambitious decarbonisation and climate neutrality targets. It focuses primarily on the competitive decarbonisation of EU industry and on the production of clean technologies in the EU. The following three technology areas on energy intensive industries having a strong and promising growth potential in Europe are in scope of this call: Managing of carbon cycle (CCU and/or CCUS): further optimization and demonstration of solutions for the capture, utilization or storage of CO2 and/or CO from installations of the energy intensive industries, with significant reduction of energy input (per ton of CO2/CO) related to capture rate and purity compared to current available technologies (target figure 30% reduction), and potential of commercialization of the decarbonized products with respect to LCA (compared to state of the art), market size, and cost. Clean energy usage in production (electrification of the processes, decarbonated production, integration of alternative clean energy carriers – e.g. hydrogen, biobased feedstock and processes – and technologies, on-site renewable energy storage solutions, usage and upgrade of waste heat): supporting major improvements of clean energy usage in the energy intensive industries until 2035. Circularity and resource efficiency (material, energy, water) of production processes: improvement by 30% until 2035 compared to current industrial value, with technological solutions which are commercially viable; and significant reduction of the overall raw material consumption, energy input, freshwater intake, impact on ecosystems and emissions, through circular value networks that convert industrial side-streams and/or end-of-use waste to new feedstock for which no low-CO2-technologies currently exist. Solutions must have an overall positive LCA and remain commercially viable under the expected regulatory and framework conditions at the end of the project. Proposals should explicitly select one main area but can also address in an integrated way a combination of these three areas within an industrial sector, provided that it is innovative and can lead to low carbon solutions, including for example bio-based solutions as a decarbonisation lever for hard-to-abate sectors. [1] The choice of the specific technologies addressed in the proposal is left to the project applicants who should include a thorough justification of the choices both in technological and business terms. Use of advanced, and safe and sustainable materials and processes could be also addressed as part of the selected proposals. Proposals are expected to: demonstrate an adequate integration of relevant technologies in support of the Clean Industrial Deal. The integration can either be demonstrated in a direct (e.g. reduction of greenhouse emissions of a process) or an indirect (e.g. production of a new green/clean product) manner. Reduction or avoidance of harmful pollutants and impact on biodiversity may also be considered, as relevant. [2] The use of relevant results of R&I projects previously or ongoing funded at EU, national or regional level is encouraged. show industrial leadership in the deployment after the project. To ensure market readiness and effective collaboration amongst relevant stakeholders, the consortium should be industry driven and composed of a preferably small and manageable number of participants, and its size should be justified. The participation of SMEs is encouraged. The draft dissemination, exploitation and communication plan is expected to include a sound and convincing business plan and market-readiness strategy (cf. intro). These should address how to prepare and support the deployment of the proposed tech solution across relevant EU industrial sectors, and/or how to ensure a high potential for market uptake through further private/public investment (including relevant EU deployment programmes, such as the Innovation Fund). They should include a comprehensive analysis of the critical barriers (technological and non-technological) for the successful market deployment and the corresponding plan to tackle them before 2030. Proposals are expected to include a clear go/no go moment ahead of the contracting and demonstration phase. Before this go/no-go moment, the project is expected to deliver detailed engineering plans, a techno-economic assessment, all needed permits for the demonstrator, a complete business plan and market-readiness strategy, identifying clearly the industrial partner(s) that will lead the deployment. Proposals are also expected to provide a clear and credible pathway to obtaining all needed permits for the demonstration phase of the project. Taking into account that the Clean Industrial Deal focuses on clean tech and decarbonisation of energy-intensive industry , projects funded under this topic will be encouraged to develop synergies and coordinate on similar funded projects under the topics HORIZON-CID-2026-01-02: R&I in Support of the Clean Industrial Deal: Clean Technologies for Climate Action and HORIZON- HORIZON-CID-2027-01-02: R&I in Support of the Clean Industrial Deal: Clean Technologies for Climate Action under this call, as well as with related projects funded under the Processess4Planet, and Clean Steel and other European Partnerships. This topic implements the co-programmed European partnerships Processes4Planet and Clean Steel. Technology Readiness Level - Technology readiness level expected from completed projects Activities are expected to start at TRL 6 and achieve TRL 7 to 8 by the end of the project – see General Annex B. [1] This topic contributes to the objectives of the Competitiveness Coordination Tool project on biobased industries. More information is available on the European Commission’s website: Biobased industry . [2] For instance, biodiversity could be a priority in specific areas with significant impact on flora or fauna

Jogosultsági és benyújtási feltételek

"> General conditions 1. Admissibility Conditions: Proposal page limit and layout In order to include a business plan and market-readiness strategy (as part of the dissemination and exploitation activities), as outlined in the introduction to this Destination, the page limit in part B of the General Annexes is exceptionally extended to a total maximum of 60 pages. described in Annex A and Annex E of the Horizon Europe Work Programme General Annexes. Proposal page limits and layout: described in Part B of the Application Form available in the Submission System. 2. Eligible Countries described in Annex B of the Work Programme General Annexes. A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon Europe projects. See the information in the Horizon Europe Programme Guide . 3. Other Eligible Conditions In line with the “ restriction on control in innovation actions in critical technology areas ” delineated in General Annex B of the General Annexes, entities established in an eligible country but which are directly or indirectly controlled by China or by a legal entity established in China are not eligible to participate in the action. If projects use satellite-based earth observation, positioning, navigation and/or related timing data and services, beneficiaries must make use of Copernicus and/or Galileo/EGNOS (other data and services may additionally be used). described in Annex B of the Work Programme General Annexes. 4. Financial and operational capacity and exclusion described in Annex C of the Work Programme General Annexes. 5a. Evaluation and award: Award criteria, scoring and thresholds To contribute to a balanced portfolio covering the three technology areas described in the scope below, grants will be awarded to applications not only in order of ranking, but also at least to one (1) application that is the highest ranked for each area according to the main area selected in the application, provided that the applications attain all thresholds. are described in Annex D of the Work Programme General Annexes. 5b. Evaluation and award: Submission and evaluation processes are described in Annex F of the Work Programme General Annexes and the Online Manual . 5c. Evaluation and award: Indicative timeline for evaluation and grant agreement described in Annex F of the Work Programme General Annexes. 6. Legal and financial set-up of the grants The granting authority may, up to 4 years after the end of the action, object to a transfer of ownership or to the exclusive licensing of results, as set out in the specific provision of Annex 5. described in Annex G of the Work Programme General Annexes. Specific conditions described in the [specific topic of the Work Programme] Application and evaluation forms and model grant agreement (MGA): Application form templates — the application form specific to this call is available in the Submission System Standard application form (HE RIA, IA) Evaluation form templates — will be used with the necessary adaptations Standard evaluation form (HE RIA, IA)   Guidance HE Programme Guide   Model Grant Agreements (MGA) HE MGA   Call-specific instructions   Information on financial support to third parties (HE)   Information on clinical studies (HE)   Additional documents: HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 6. Civil Security for Society HE Main Work Programme 2026-2027 – 7. Digital, Industry and Space HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility HE Main Work Programme 2026-2027 – 14. Horizontal Activities HE Main Work Programme 2026-2027 – 15. General Annexes HE Programme Guide HE Framework Programme 2021/695 HE Specific Programme Decision 2021/764 EU Financial Regulation 2024/2509 Decision authorising the use of lump sum contributions under the Horizon Europe Programme Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Online Manual   Funding & Tenders Portal Terms and Conditions   Funding & Tenders Portal Privacy Statement

Hivatkozott dokumentumok

Annex A Horizon Europe Programme Guide Online Manual Standard application form (HE RIA, IA) Standard evaluation form (HE RIA, IA) HE MGA Information on financial support to third parties (HE) Information on clinical studies (HE) HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 6. Civil Security for Society HE Main Work Programme 2026-2027 – 7. Digital, Industry and Space HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility HE Main Work Programme 2026-2027 – 14. Horizontal Activities Decision authorising the use of lump sum contributions under the Horizon Europe Programme Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Terms and Conditions