R&I in Support of the Clean Industrial Deal: Clean Technologies for Climate Action (HORIZON-CID-2027-01-02)

Scope: The Clean Industrial Deal aims to secure the EU as an attractive location for manufacturing, including for energy-intensive industries, and to promote clean tech and new circular business models in order to meet Europe’s ambitious decarbonisation and climate neutrality and biodiversity preservation targets. It focuses primarily on the competitive decarbonisation of EU industry and on the production of clean technologies in the EU. This requires notably a considerable increase in electrification of EU energy systems and in all end-use sectors of the European economy (either directly, or via enabling intermediate technologies). The following three clean tech areas have a strong and promising growth potential in Europe. Proposals are expected to address one or several of these areas: Integrated net-zero emissions energy systems (e.g. including energy grids, networks and systems) Enhanced zero-emission power technologies (e.g. including renewable electricity, heat and energy technologies) Storage technologies, renewable fuels, and carbon capture and utilisation (CCU) (e.g. including batteries and other energy storage solutions, renewable hydrogen [4] , advanced biofuels and synthetic renewable fuels) enabling climate neutrality Proposals should explicitly select one main area but can also address in an integrated way a combination of these three areas. Applicants are free to decide on the specific value chain they wish to strengthen in the above clean tech areas. As part of bringing innovative clean tech solutions closer to the market, proposals may also address step-change in relevant network and infrastructure deployment to facilitate scale up across the trans-European energy and transport networks – e.g. electricity, heat, gas, hydrogen, CO2, batteries, and refuelling networks, etc. Application of advanced innovative materials development, connected process engineering and scale-up, resource efficiency, circularity and recycling may also be addressed as part of the selected value chain, as relevant. Attention should be paid to avoid technologies which may have a negative impact on biodiversity and ecosystems. Proposals are expected to: ensure the development of innovative technological solutions along a specific clean tech value chain. For this, they need to involve an adequate combination of clean tech suppliers, energy users (e.g. manufacturing, energy and transport) and other relevant stakeholders, in order to support a sound business case, taking into account a gender-sensitive and intersectional approach. demonstrate an adequate integration of relevant technological solutions including clean tech and industrial decarbonisation solutions in support of the Clean Industrial Deal, and to ensure a clear and quantifiable impact on competitiveness and reduction of GHG emissions. Reduction or avoidance of harmful pollutants and impact on biodiversity may also be considered, as relevant [5] . The integration can either be demonstrated in a direct (e.g. energy to an industrial/transport sector) or an indirect (e.g. energy to grid to an industrial/transport sector) manner. The use of relevant results of R&I projects previously or currently funded at EU or national level is encouraged. show industrial leadership in view of the deployment after the project. To ensure market readiness and effective collaboration amongst relevant stakeholders along a specific clean tech value chain, the consortium should be industry driven and composed of a manageable number of participants (indicatively, not more than ten participants). The consortium size should be justified based on the extent of the value chain covered. The participation of SMEs is encouraged. seek coherence with the work of the Strategic Energy Technology (SET) Plan and relevant industrial initiatives. The draft dissemination, exploitation and communication plan is expected to include a sound and convincing business plan and market-readiness strategy (cf. intro). They should address how to prepare and support the deployment of the proposed clean tech solution across relevant EU industrial sectors (e.g. energy, transport, manufacturing) and/or how to ensure a high potential for market uptake through further private/public investment (including relevant EU deployment programmes, such as the Innovation Fund). They should include a comprehensive analysis of the critical barriers (technological and non-technological) for the successful market deployment and the corresponding plan to address them. Proposals are expected to include a clear go/no go moment ahead of the contracting and demonstration phase. Before this go/no-go moment, the project is expected to deliver detailed engineering plans, a techno-economic assessment, all needed permits for the demonstrator, a complete business plan and market-readiness strategy, identifying clearly the industrial partner(s) that will lead the deployment. Proposals are also expected to provide a clear and credible pathway to obtaining all needed permits for the demonstration phase of the project. Taking into account that the Clean Industrial Deal focuses on clean tech and energy-intensive industry decarbonisation, projects funded under this topic will be encouraged to develop synergies and coordinate with similar or complementary projects funded under the topics HORIZON-CID-2026-01-02: R&I in Support of the Clean Industrial Deal: Decarbonisation of Energy Intensive Industries and HORIZON-CID-2027-01-02: R&I in Support of the Clean Industrial Deal: Decarbonisation of Energy Intensive Industries under this call, as well as with relevant projects funded under relevant European Partnerships (including e.g. the Clean Hydrogen Joint Undertaking and the Clean Energy Transition Partnership). Technology Readiness Level - Technology readiness level expected from completed projects Activities are expected to start at TRL 6 and achieve TRL 8 by the end of the projec. [1] Net-Zero Industry Act: resource.html [2] This should apply to each main specific component of the project for which, under the NZIA, it is established that more than 50% of Union’s supply originates from a third country. In such cases, at least 50% of these components should be sourced from the EU or other Horizon Europe Associated Countries. In cases where a strong dependency would compromise the viability of the project, beneficiaries may aim at a lower percentage providing an adequate justification in the proposal. [3] 860c257b-16db-429e-91c1-a30bea57e7ce_en [4] Projects need to ensure complementarities with the activities under the Clean Hydrogen Joint Undertaking [5] For instance, biodiversity could be a priority in specific areas with significant impact on flora or fauna.

Jogosultsági és benyújtási feltételek

"> General conditions 1. Admissibility Conditions: Proposal page limit and layout In order to include a business plan and market-readiness strategy (as part of the dissemination and exploitation activities), as outlined in the introduction to this Destination, the page limit in part B of the General Annexes is exceptionally extended to a total maximum of 60 pages. described in Annex A and Annex E of the Horizon Europe Work Programme General Annexes. Proposal page limits and layout: described in Part B of the Application Form available in the Submission System. 2. Eligible Countries described in Annex B of the Work Programme General Annexes. A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon Europe projects. See the information in the Horizon Europe Programme Guide . 3. Other Eligible Conditions In line with the “ restriction on control in innovation actions in critical technology areas ” delineated in General Annex B of the General Annexes, entities established in an eligible country but which are directly or indirectly controlled by China or by a legal entity established in China are not eligible to participate in the action. If projects use satellite-based earth observation, positioning, navigation and/or related timing data and services, beneficiaries must make use of Copernicus and/or Galileo/EGNOS (other data and services may additionally be used). described in Annex B of the Work Programme General Annexes. 4. Financial and operational capacity and exclusion described in Annex C of the Work Programme General Annexes. 5a. Evaluation and award: Award criteria, scoring and thresholds To contribute to a balanced portfolio covering the three technology areas described in the scope below, grants will be awarded to applications not only in order of ranking, but also at least to one (1) application that is the highest ranked for each area according to the main area selected in the application, provided that the applications attain all thresholds. are described in Annex D of the Work Programme General Annexes. 5b. Evaluation and award: Submission and evaluation processes are described in Annex F of the Work Programme General Annexes and the Online Manual . 5c. Evaluation and award: Indicative timeline for evaluation and grant agreement described in Annex F of the Work Programme General Annexes. 6. Legal and financial set-up of the grants The granting authority may, up to 4 years after the end of the action, object to a transfer of ownership or to the exclusive licensing of results, as set out in the specific provision of Annex 5. described in Annex G of the Work Programme General Annexes. Specific conditions described in the [specific topic of the Work Programme] Application and evaluation forms and model grant agreement (MGA): Application form templates — the application form specific to this call is available in the Submission System Standard application form (HE RIA, IA) Evaluation form templates — will be used with the necessary adaptations Standard evaluation form (HE RIA, IA)   Guidance HE Programme Guide   Model Grant Agreements (MGA) HE MGA   Call-specific instructions   Information on financial support to third parties (HE)   Information on clinical studies (HE)   Additional documents: HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 7. Digital, Industry and Space HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility HE Main Work Programme 2026-2027 – 14. Horizontal Activities HE Main Work Programme 2026-2027 – 15. General Annexes HE Programme Guide HE Framework Programme 2021/695 HE Specific Programme Decision 2021/764 EU Financial Regulation 2024/2509 Decision authorising the use of lump sum contributions under the Horizon Europe Programme Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Online Manual   Funding & Tenders Portal Terms and Conditions   Funding & Tenders Portal Privacy Statement

Hivatkozott dokumentumok

860c257b-16db-429e-91c1-a30bea57e7ce_en Annex A Horizon Europe Programme Guide Online Manual Standard application form (HE RIA, IA) Standard evaluation form (HE RIA, IA) HE MGA Information on financial support to third parties (HE) Information on clinical studies (HE) HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 7. Digital, Industry and Space HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility HE Main Work Programme 2026-2027 – 14. Horizontal Activities Decision authorising the use of lump sum contributions under the Horizon Europe Programme Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Terms and Conditions