Sustainable aircraft circular design and additive manufacturing, towards a climate neutral aviation

Scope: This topic focuses on: Additive design and manufacturing of aircraft and engine structural components have already transformed the industry and are expected to be the key to the EU competitiveness. Geopolitical aspects for raw materials reinforce the importance of additive manufacturing, while the European RTOs and industry recognised that there is a substantial untapped potential towards even higher energy efficiency, savings in critical raw materials and higher quality parts. The main objective of this topic is to resolve existing challenges in the AD/AM of metal, high performance/value polymer and composite parts, related to residual stresses, non-equilibrium phase transformations, joining, defects and reproducibility among others. Building on previous research efforts (i.e. H2020-SUSTAINair) and EREA’s Future Sky initiatives on circular aviation, proposals should focus to real, challenging and competitive industrial use cases for circular design of individual components, joining technologies, improved maintenance and repair technologies to extend aircraft lifetime and improved recovery of high-quality recycling materials. Especially as regards engines and safety critical systems, real-time condition monitoring and inspection methods have the potential to improve repairability by determining an optimized degradation status, allowing smart repairs on-wing and on-site that reduce or postpone the need for material- and energy-intense overhauls or replacements.

Eligibility and submission conditions

"> General conditions 1. Admissibility Conditions: Proposal page limit and layout described in Annex A and Annex E of the Horizon Europe Work Programme General Annexes. Proposal page limits and layout: described in Part B of the Application Form available in the Submission System. 2. Eligible Countries described in Annex B of the Work Programme General Annexes. A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon Europe projects. See the information in the Horizon Europe Programme Guide . 3. Other Eligible Conditions If projects use satellite-based earth observation, positioning, navigation and/or related timing data and services, beneficiaries must make use of Copernicus and/or Galileo/EGNOS (other data and services may additionally be used). described in Annex B of the Work Programme General Annexes. 4. Financial and operational capacity and exclusion described in Annex C of the Work Programme General Annexes. 5a. Evaluation and award: Award criteria, scoring and thresholds are described in Annex D of the Work Programme General Annexes. 5b. Evaluation and award: Submission and evaluation processes are described in Annex F of the Work Programme General Annexes and the Online Manual . 5c. Evaluation and award: Indicative timeline for evaluation and grant agreement described in Annex F of the Work Programme General Annexes. 6. Legal and financial set-up of the grants The granting authority may, up to 4 years after the end of the action, object to a transfer of ownership or to the exclusive licensing of results, as set out in the specific provision of Annex 5. Eligible costs will take the form of a lump sum as defined in the Decision of 7 July 2021 authorising the use of lump sum contributions under the Horizon Europe Programme – the Framework Programme for Research and Innovation (2021-2027) – and in actions under the Research and Training Programme of the European Atomic Energy Community (2021-2025) [This [decision is available on the Funding and Tenders Portal, in the reference documents section for Horizon Europe, under ‘Simplified costs decisions’ or through this link: https://ec.europa.eu/info/funding-tenders/opportunities/docs/2021-2027/horizon/guidance/ls-decision_he_en.pdf ]]. described in Annex G of the Work Programme General Annexes. Specific conditions Not applicable. Application and evaluation forms and model grant agreement (MGA): Application form templates — the application form specific to this call is available in the Submission System Standard application form (HE RIA, IA) Evaluation form templates — will be used with the necessary adaptations Standard evaluation form (HE RIA, IA)   Guidance HE Programme Guide   Model Grant Agreements (MGA) Lump Sum MGA   Call-specific instructions   Detailed budget table (HE LS)   Guidance: "Lump sums - what do I need to know?" Additional documents: HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility HE Main Work Programme 2026-2027 – 15. General Annexes HE Programme Guide HE Framework Programme 2021/695 HE Specific Programme Decision 2021/764 EU Financial Regulation 2024/2509 Decision authorising the use of lump sum contributions under the Horizon Europe Programme Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Online Manual   Funding & Tenders Portal Terms and Conditions   Funding & Tenders Portal Privacy Statement

Programme context

This Destination addresses activities that improve the climate and environmental footprint, as well as competitiveness, of different transport modes. The areas of rail and air traffic management will be addressed through dedicated Institutional European Partnerships and are therefore not included in this document. This Destination contributes directly to the Strategic Plan’s Key Strategic Orientations ‘ Green transition ’, ‘ Digital transition ’ and ‘ A more resilient, competitive, inclusive and democratic Europe ’. In line with the Strategic Plan, the overall expected impact of this Destination is to contribute to the ‘Achieving sustainable and competitive transport modes’ . The main impacts to be generated by topics under this Destination are: Zero-emission road transport Accelerated uptake of a zero-tailpipe emission ecosystem, with interoperable technological solutions developed at system level (vehicles, infrastructure, user and energy grid) that support the global competitiveness of the EU transport and mobility system. Zero-tailpipe emission mobility solutions developed that are affordable, efficient, user-friendly, inclusive, safe and circular with concepts and technologies that are easy to deploy, considering needs, behaviours and socio-economic conditions of all end-users. Clean mobility solutions for a climate neutral and environmentally friendly and zero pollution mobility with a higher level of circularity; Increased responsiveness of zero tailpipe emission vehicles and systems to diverse societal interests and concerns. Aviation Enable breakthrough technologies and innovations that will contribute to the design (addressing also eco-design and circularity principles), manufacturing, maintenance and operations of new generation aircrafts, also powered by renewable energy and sustainable aviation fuels, for a competitive and clean EU aviation ecosystem (including airports). Derisk and accelerate the introduction of new digital technologies (with emphasis on AI) at all levels in the industrial aviation ecosystem, while addressing all safety-related issues in collaboration with the European Union Aviation Safety Agency (EASA). Waterborne transport Higher autonomy range in electric and hybrid vessels. Uptake of renewable and low carbon fuels and improved knowledge on the suitability of innovative renewable and low carbon fuels and other energy carriers for waterborne transport. Support the objectives of the European Port Strategy and Waterborne Industrial Strategy, contributing the role of ports as energy hubs, improving efficiency and safety through digitalization, improving the resilience and security of the transport network, as well as increasing the competitiveness of the industrial and technology EU capabilities. Significant reduction of emissions from large vessels due to the merging of energy efficiency and renewable and low carbon fuels. Sustainability of waterborne transport by design, considering air and water pollution, circularity and life-cycle assessments in shipbuilding. Improved safety of seafarers, port workers and the environment. Transport-related environment and health The better monitoring of the environmental performance and enforcement of emissions regulation and biodiversity protection in order to reduce the overall environmental impact of transport (e.g.: as regards biodiversity, noise, pollution and waste) on human health and ecosystems. Legal entities established in China are not eligible to participate in both Research and Innovation Actions (RIAs) and Innovation Actions (IAs) falling under this destination. For additional information please see “Restrictions on the participation of legal entities established in China” found in General Annex B of the General Annexes.

Hivatkozott dokumentumok

Annex A Horizon Europe Programme Guide Online Manual [This [decision Standard application form (HE RIA, IA) Standard evaluation form (HE RIA, IA) Lump Sum MGA Detailed budget table (HE LS) Guidance: "Lump sums - what do I need to know?" HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Terms and Conditions