De-risking renewable fuel technologies through transnational pre-commercial procurement of renewable fuel industrial value chains

Energy producers, clean tech manufacturing industries, researchers and consumers benefit from improved performance, lower environmental impact, security and competitiveness of ad-hoc renewable fuel technologies compared to existing ones, as well as new market opportunities. Community, public authorities and industry benefit from sharing the de-risking cost and reducing it by engaging several competing solution suppliers/technology providers in parallel, boosting transnational public and private investments in de-risking and attracting new players to tackle supplier lock-in issues The implementation of the Strategic Energy Technology Plan (SET Plan) Action of Renewable Fuels and Bioenergy is supported and facilitated by better alignment of public and private R&I priorities and of funding mechanisms. Policy makers and regulators are provided with evidence to accelerate permitting procedures and increase the public acceptance of innovative and sustainable renewable fuel projects improving the regulatory framework. Scope: An exceptional effort is needed to develop, demonstrate and de-risk essential renewable fuels technologies and establish their industrial value chains in a cost-effective way to cover the EU needs where renewable fuels are the main long-term solution. Proposals should steer the development of these technologies at EU level and bring them to the market. Pre-commercial procurement of R&D, validation and possibly, first deployment of industrial value chains of essential renewable fuel technologies is considered an effective tool to de-risk such activities and overcome the “valley of death” because real take off by engaging primarily concerned contracting entities is expected. The scope of this action is to design and bring industrial value chains of essential renewable fuel technologies at TRL 8 by the action end. The competitive development in phases of entire industrial value chains should built upon existing knowledge on technology and value chain readiness based on existing EU projects and studies, thus speeding up the de-risking. ‘Transnational buyers’ could be public plus possibly one or more private procurers, and that provide similar services of public interest. The buyers will collectively develop and implement the pre-commercial procurement of R&D services from a number of providers and designate a lead procurer to award the contracts. The procurement must be open to providers of R&D services established in any EU Member States and Associated Countries. Inclusiveness of a broad range of public and private procures across EU and Associated Countries and across national borders is encouraged, to effectively share the risk and benefit from creating in the EU market readiness of industrial value chains of essential renewable fuel technologies. Public and private EU airport and port authorities and their respective managing bodies, aircraft operators and shipping companies, other state, regional or local authorities and bodies governed by public law or their associations, are some examples of expected public [1] and private procurers with an incentive to improve solutions in areas of public interest, such as reduction of greenhouse gas emissions from energy supply as fuels. The consortium is encouraged to plan activities during the project to raise awareness to the R&D providers that will win PCP contracts about unlocking and increasing their investment capacity in the field of renewable fuel technologies, for example by using possible combinations of the PCP procurement contract with additional support for companies from the EIC, InvestEU, regional funds or possibly other sources of Union funding. Participation of public contracting authorities and entities managing or funding such funds in the project is encouraged. In addition, the procurers should include in the proposal what will be their planned approach for deployment in case the PCP results in successful solutions; this could be through a combination of deploying a limited set of solutions already during the PCP project and/or foreseeing a deliverable that prepares follow-up procurement to purchase (larger volumes of) such type of solution(s) after the PCP. Essential value chains to de-risk should be based on identified technologies by our studies [2] (i) – vii) below) as those that can contribute essentially to domestic commercial fuel production beyond 2030, and possibly other that can be demonstrated at commercial scale by the end of the execution phase of the project [3] : Production of advanced bioEthanol and further processing into ATJ-SPK Biomass Gasification and FT-Synthesis to produce FT-SPK Production of BioMethanol for further processing into MTJ Hydrotreatment of Lipids from marginal/contaminated lands to produce HEFA Biomass Pyrolysis and Upgrading or co-processing to produce biokerosene and bio-heavy fuel oil Biomethane from AD and Gasification and Methanation to produce biomethane for shipping or further processing into methanol (methanolysis) for shipping E-Methanol production from CO2 and renewable H2 for shipping Industrial value chains of the essential renewable fuel technologies should be developed based on domestic sustainable feedstocks across EU and Associated Countries and on also creating synergies across all end use energy and transport sectors for markets and production facilities for renewable fuels. Hydrogen production as end-product is not in scope. [1] Public contracting authorities and entities as defined in REGULATION (EU) 2021/695, Directives 2014/24/EU and 2014/25/EU [2] a) Study on Development of Outlook for the Necessary Means to Build Industrial Capacity for Drop-in Advanced Biofuels - European Commission , b) How To Mobilize Industrial Capacity Building For Advanced Biofuels [3] All hydrogen used to the production of the synthetic fuels should comply with the EU legislation on the renewable and low carbon methodology, i.e. the processes of Steam Methane Reforming using fossil fuels for the production are out of the scope, as there is no RI associated to these methods.

Eligibility and submission conditions

"> General conditions 1. Admissibility Conditions: Proposal page limit and layout Due to the complexity of the topic, the page limit for proposals is increased to 60 pages. described in Annex A and Annex E of the Horizon Europe Work Programme General Annexes. Proposal page limits and layout: described in Part B of the Application Form available in the Submission System. 2. Eligible Countries described in Annex B of the Work Programme General Annexes. A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon Europe projects. See the information in the Horizon Europe Programme Guide . 3. Other Eligible Conditions If projects use satellite-based earth observation, positioning, navigation and/or related timing data and services, beneficiaries must make use of Copernicus and/or Galileo/EGNOS (other data and services may additionally be used). described in Annex B of the Work Programme General Annexes. 4. Financial and operational capacity and exclusion described in Annex C of the Work Programme General Annexes. 5a. Evaluation and award: Award criteria, scoring and thresholds are described in Annex D of the Work Programme General Annexes. 5b. Evaluation and award: Submission and evaluation processes are described in Annex F of the Work Programme General Annexes and the Online Manual . 5c. Evaluation and award: Indicative timeline for evaluation and grant agreement described in Annex F of the Work Programme General Annexes. 6. Legal and financial set-up of the grants described in Annex G of the Work Programme General Annexes. Specific conditions described in the [specific topic of the Work Programme] Application and evaluation forms and model grant agreement (MGA): Application form templates — the application form specific to this call is available in the Submission System Standard application form (HE PCP) Evaluation form templates — will be used with the necessary adaptations   Standard evaluation form (HE PCP PPI)   Guidance HE Programme Guide   Model Grant Agreements (MGA) HE MGA   Additional documents: HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility HE Main Work Programme 2026-2027 – 15. General Annexes HE Programme Guide HE Framework Programme 2021/695 HE Specific Programme Decision 2021/764 EU Financial Regulation 2024/2509 Decision authorising the use of lump sum contributions under the Horizon Europe Programme Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Online Manual   Funding & Tenders Portal Terms and Conditions   Funding & Tenders Portal Privacy Statement

Programme context

This Destination includes activities targeting a sustainable, secure and competitive energy supply. In line with the scope of cluster 5, this includes activities in the areas of renewable energy; energy system, grids and storage; as well as Carbon Capture, Utilisation and Storage (CCUS). This Destination contributes directly to the Strategic Plan’s Key Strategic Orientations ‘ Green transition ’, ‘ Digital transition ’ and ‘ A more resilient, competitive, inclusive and democratic Europe ’. In line with the Strategic Plan, the overall expected impact of this Destination is to contribute to the ‘Ensuring more sustainable, secure and competitive energy supply through solutions for smart energy systems based on renewable energy solutions’ . This destination contributes to the activities of the Strategic Energy Technology Plan (SET Plan) and its implementation working groups. The main impacts to be generated by topics under this Destination are: Renewable energy Energy producers have access to efficient and competitive European renewable energy and renewable fuel technologies with a solid knowledge base and are able to deploy them to enhance the EU’s energy security and reach its climate neutrality objectives, in a sustainable way in environmental (e.g., biodiversity, multiple uses of land and water, natural resources, pollution) and socioeconomic terms, and in line with the Sustainable Development Goals. Technology providers have access to European, competitive, resilient, reliable, sustainable, and affordable value chains of renewable energy and renewable fuel technologies including emerging ones, and with strong export potential to supply both the EU internal and global markets. They benefit also from circular renewable energy technologies that are safe and sustainable by design with reduced and diversified external dependence on critical raw materials [1] . Economic sectors benefit from better integration of renewable energy and renewable fuel-based solutions that are, among others, competitive, cost-effective, efficient, flexible, reliable, and sustainable. Such integration is facilitated through digitalisation and integration of artificial intelligence of renewable energy technologies that provide network stability and reliability. European industries benefit from a reinforced export potential of renewable energy and renewable fuel technologies, also through international partnerships, and become more competitive in innovative renewable energy technologies in Europe and globally. European researchers benefit from a stronger community and from a reinforced scientific basis on renewable energy and renewable fuel technologies including emerging ones, also through international collaborations. European citizens have access to an energy market that is fair and equitable, more resilient, uses all different types of local renewable energy resources, and is less dependent on fossil fuels imports. Citizens experience less fuel and energy poverty, and also benefit from new employment and upskilling opportunities. Local communities benefit from a more decentralized, affordable, and secure energy system and from multiple uses of land and water. Energy systems, grids and storage R&I actions will support the just digital and green transformation of the energy system through advanced solutions for accelerating the energy systems integration and decarbonisation . The developed clean, sustainable solutions will contribute to making the energy system work better for actors and supply more reliable, resilient and secure energy – even under increasingly more frequent extreme climate events. The solutions developed will contribute to increase flexibility and grid hosting capacity for renewables through optimizing cross sector integration and grid scale storage as well as cover off-grid situations. They will improve the preparedness of the electricity system to support the EU's binding target for 2030 of minimum of 42.5% renewables in the gross final energy consumption (with the aspiration to reach 45%), and full decarbonisation by 2050. They will enable further electrification of demand and will enhance the competitiveness of the European value chain , reduce pressure on resources (also by making technologies ‘circular by design’) and decrease dependencies. Such solutions would also enable a better EU resilience to climate risks. The solutions will improve consumer awareness and engagement in the energy transition, via innovative offers and services (e.g. demand response, energy communities) and will target different types of consumers, including “hard to reach” population groups (such as energy poor or low-income households). This will result in increased trust in, and uptake of the new products and services entering the energy system. Carbon capture, use and storage (CCUS) and carbon dioxide removal (CDR) Accelerated deployment of carbon capture, use and storage (CCUS) as a CO2 emission mitigation option in electricity generation and/or in industry applications, as well as carbon dioxide removal for negative emissions. Legal entities established in China are not eligible to participate in both Research and Innovation Actions (RIAs) and Innovation Actions (IAs) falling under this destination. For additional information please see “Restrictions on the participation of legal entities established in China” found in General Annex B of the General Annexes. [1] For an example of a methodology for the assessment of sustainability, circularity and contribution to EU resilience and technological autonomy of clean energy technology in the R&I pipeline, please see Study on circular approaches for a sustainable and affordable clean energy transition

Hivatkozott dokumentumok

Annex A Horizon Europe Programme Guide Online Manual Standard application form (HE PCP) Standard evaluation form (HE PCP PPI) HE MGA HE Main Work Programme 2026-2027 – 1. General Introduction HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility Decision authorising the use of lump sum contributions under the Horizon Europe Programme Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Terms and Conditions